Simco-Ion Ceiling Emitter Ionizer Model 5509e

$765.00

In a matter of seconds, the Model 5509e ceiling ionization system eliminates electrostatic discharge and particle contamination caused by electrostatic attraction. The 5509e ceiling emitters are designed to provide uniform ionization throughout the open areas of a cleanroom. Mounted onto the ceiling surface or inside a flush mount channel, Model 5509e ceiling emitters maintain aesthetics without disrupting cleanroom laminar airflow or compromising the integrity of operating class 1 cleanrooms.

  • Low voltage operation (24 VAC)
  • Individually adjustable ion emission output
  • Feedback with alarms available at each emitter
  • Pulsed DC technologies with local and system-wide adjustment controls
  • Available with single crystal silicon emitter points
SPEC SHEET
Categories: ,

Description

Input Voltage 24 VAC, 50/60 Hz, 1.25W
Control Signal ±10 VDC control signal from a 5024(e) or 5084e controller
Output Voltage 0-18 kVDC, ±10% for each polarity; positive and negative output levels adjusted centrally at controller and locally at each emitter
Output Current <15 mA; current and voltage limited to eliminate shock hazard
Connectors Telephone type RJ-11 modular jack receptacle on each end of emitter
Output Control Each emitter has controls that independently adjust both positive and negative output
Regulation Output and balance stability is achieved by independently regulating the ion emission voltage of each polarity at each emitter
Timing Precise timing (0-10 sec) is supplied by the controller. LEDs on each emitter indicate the polarity of the ion emission
Ion Emission Pulsed DC
Emitter Points Single crystal silicon, machined titanium, or tungsten alloy; all emitter points are replaceable; estimated emitter point life varies from 2-3 years depending on material used
Calibration Annually, semi-annually, or quarterly depending on manufacturing sensitivity
Ozone <0.005 ppm
EMI Below background level
Alarm Visual alarm, red LED located in the middle of the emitter chassis indicates an alarm condition; audible alarm, sounds at the 5024e/5084e controller when an alarm event occurs at any emitter
Mounting A variety of surface and flush mounting methods and brackets is available, including cleanroom-compatible interlocking self-adhesive mounts (3M TYPE SJ 3551)
Emitter Rods Available in 2.5, 5, 10, 15, 24, 36, or 60 in. lengths (63.5, 127, 254, 381, 609, 914, 1524 mm)
Dimensions 1.25H x1.5D x 17.5L in. (3.2 x 3.8 x 44.5 cm)
Weight 1.4 lb (0.5 kg)
Components Required Model 5024(e) or 5084(e) Controller
Warranty 2 year limited warranty